Digital Panel Meters  

Digital Voltmeter (type DMV):-

These meters are accurate and are characterized by steady bright 7-segment LED display and are available in compact size of 96 X 96 X 60mm. Normally available for range of 0-600V AC, the Digital Voltmeters are also available for ranges from 0-200mV, 0-2V, 0-200V, direct reading DC or AC. They are also available for PT operated HT applications. Ripple integration provided in DC meters gives stable display for bridge rectified power supplies

Digital Ammeter (type DMA)
These meters are accurate, and are available in compact size of 96 X 96 X 60mm. Normally available for CT operated AC application, the Ammeter is also available for ranges of 0-2mA, 0-20mA, 0-2A and 0-5A, direct reading DC or AC. CT operated Ammeters are available in two versions. Factory set CT ratio: The CT ratio specified by the user is programmed into the meter, the meter then shows the CT primary current based on the secondary current received by it. Scalable CT ratio: The User can select the CT ratio by means of a DIP switch located at the rear of the meter. The meter is programmed for a CT secondary rating of 5Amps. The CT primary rating is selectable from 100 Amps to 1600 Amps in steps of 100 Amps. This version enables reduction of inventory and also avoids re-calibration in case of changes at Scalable CT ratio

Digital Frequency Meter (type DMF)
These meters are accurate and are available in compact size of 96 X 96 X 60mm. It is designed to accept wide-ranging voltage input from 50V to 600V. Available for the Mains Frequency range of 45.0-55.0Hz, the display of the meter is exceptionally steady compared to some other makes of frequency meters that are based on counting circuits. The Syntron Frequency Meter is based on a built in frequency to voltage transducer. The output of the transducer being integrated for conversion to digital display, the display is steady, and accurate

Digital Watts, KW and MW meters (types DM1P1EW, DM3P2EW and DM3P3EW)
These meters are accurate and are available in compact size of 96 X 96 X 110mm. The meter is Microcontroller based and Time shared four-quadrant multiplier technology is used for accurate measurement at all power factors. The Microcontroller multiplier provides very accurate measurements. The meters are available in single-phase single element (type DM1P1EW), three phase double element (type DM3P2EW) and three phase triple element (type DM3P3EW) versions, for LT as well as HT applications

Digital var, Kvar and Mvar meters (type DM3P2EVAR)
These meters are accurate and are available in compact size of 96 X 96 X 110mm.The meter is Microcontroller based. Time shared four-quadrant multiplier technology is used for accurate measurement at all power factors leading as well as lagging. The Microcontroller multiplier provides very accurate measurements. Full-scale display of up to 9999 is possible because of the Microcontroller, enabling direct display of the input variable. The meters are available in three-phase double element version for LT as well as HT application

Digital Power Factor Meters (cos PI) (types DM1P1EPF, DM3P1EPF, DM3P2EPF and DM3P3EPF)
These meters are accurate and are available in compact size of 96 X 96 X 60mm for single element PF meters and 96 X 96 X 110mm for three phase meters. The meter is Microcontroller based. These are three-and-a-half digit meters, showing accurately power factors from 0.000 to 1.000. Separate lag/lead indications are provided by LEDs. The absence of current is shown by the microcontroller as 1.uuu and wrong external connections are shown as 2.uuu as per standard practice of Syntron

Digital Meters for process signals (types 0-5V DC and 4-20mA DC)
These meters are accurate and are characterized by steady bright 7-segment 12.7mm LED display and are available in compact size of 96 X 96 X 60mm.The meter is designed to display the parameter being measured by a transducer